32
Central TS-1000 reset default: Set the configuration back to the
default settings
And then, click Apply to apply the configuration
Terminal TS-1000 RJ-45 port setting: The RJ-45 port of the terminal
site setting. When the connection is established between the central
site, user are able to configure the terminal site
Link: the port link status
Speed: Configure the port speed in force negotiation mode –
100Mbps or 10 Mbps
Duplex: When the port negotiation is in force mode, you can
configure duplex mode – half or full
Auto-Negotiation: Configure the negotiation mode – auto or
force
Bandwidth Input Rate: Configure the input bandwidth rate –
10/100Mbps, 2.5/ 25Mbps, 5/50Mbps, or 7.5/75Mbps
Bandwidth output Rate: Configure the output bandwidth rate –
10/100Mbps, 2.5/ 25Mbps, 5/50Mbps, or 7.5/75Mbps
Terminal TS-1000 reset default: Set the configuration back to the
default settings
And then, click Apply to apply the configuration
Verify Test: Set up some TS-1000 loop back test
Embedded SSRAM BIST: To test central site converter module
status. When test back value is OK, it means the central site
converter module is normal. When test back value is fail or didn’t
test, it means the central site converter module is fail
In-Band Loop Back Test: Checking the fiber port connection
status between remote and central site converter. User needs to
set a transfer value and verify the return value same as user has
set
Auto Loop Back Test: Checking the fiber port connection status
between remote and central site converter automatically
When all items are set, click
Test
to start the testing
TS-1000 POA setting: Set up the power off alarm function
Summary of Contents for Milan MIL-RCM16A-V2
Page 20: ...15 The Main Menu...
