Transition Networks M/GE-PSW-LX-01, User Manual

Page: 9 / 15

Transition Networks, Inc. M/GE-PSW-xX-01 User Guide
33398 Rev. D https://www.transition.com/ Page 9 of 15
Rate conversion
The M/GE-PSW-xX-01 media converters allow the following connections:
•
10Mb/s devices on a 10Base-T legacy copper network to 1000Mb/s devices on a 1000Base SX/LX
Gigabit Ethernet fiber network.
•
100Mb/s devices on a 100Base-T legacy copper network to 1000Mb/s devices on a 1000Base SX/LX
Gigabit Ethernet fiber network.
Cable Specifications
The physical characteristics must meet or exceed IEEE 802.3 ™ specifications.
Fiber Cable
Bit Error Rate: <10-9
Single mode fiber
(recommended)
: 9 μm
Multimode fiber
(recommended)
: 62.5/125 μm
Multimode fiber
(optional)
: 100/140, 85/140, 50/125 μm
M/GE-PSW-SX-01 850nm multimode
Fiber Optic Transmitter Power: min: -10.0 dBm max: -4.0 dBm
Fiber Optic Receiver Sensitivity: min: -17.0 dBm max: -0.0 dBm
Link Budget: 7.0 dB
M/GE-PSW-LX-01 1310 nm single mode
Fiber-optic Transmitter Power: min: -9.5 dBm max: -3.0 dBm
Fiber-optic Receiver Sensitivity: min: -20.0 dBm max: -3.0 dBm
Link Budget: 10.5 dB
M/GE-PSW-LX-01(100) 1310TX/1550RX nm single mode
M/GE-PSW-LX-01(101) 1550TX/1310RX nm single mode
Fiber-optic Transmitter Power: min -8.0 dBm max: -3.0 dBm
Fiber-optic Receiver Sensitivity: min: -21.0 dBm max: -3.0 dBm
Link Budget: 13 dB
M/GE-PSW-SX-01(ST) 850 nm duplex ST multimode
Fiber-optic Transmitter Power: min: -9.5 dBm max: -4 dBm
Fiber-optic Receiver Sensitivity: -18 dBm
Link Budget: 8.5 db
Class 1 Laser International Safety Standard IEC 60825-1 Compliant. Complies with IEC 60825-1 and FDA
21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and
voltage limits.
The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-
825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.