Transition Networks M/GE-PSW-LX-01, User Manual

Page: 12 / 15

Transition Networks, Inc. M/GE-PSW-xX-01 User Guide
33398 Rev. D https://www.transition.com/ Page 12 of 15
The information in this manual is subject to change. For the most current information, view the online
manual at
https://www.transition.com .
Troubleshooting
If the media converter fails, isolate and correct the failure by determining the answers to the following
questions and then taking the indicated action:
1.
Is the PWR (power) LED lit and did the TX and FX LEDs turn ON then turn OFF?
NO
• Is the power adapter the proper type of voltage and cycle frequency for the AC outl et?
• Is the power adapter properly installed in the media converter and in the outlet?
• Contact TN Tech Support . See Contact Us on page 13 below.
YES
• Proceed to step 2.
Note: As a link pass-through device, both the copper and the fiber cables must be installed before the
LEDs will light.
2.
Are the “ FX – Link ” and “ TX-Link/Act ” LEDs lit on the RJ -45 port?
NO
• Check the copper cables for proper connection. See “ Copper and Fiber Ports ” on page 4 .
• Check the fiber cables for proper connection. See “ Copper and Fiber Ports ” on page 4 .
• Contact TN Tech Support. See Contact Us on page 13 below.
YES
For More Information
Other related manuals are listed below.
•
SPS-2460-xx Power Supply User Guide (33455)
•
WMBS, WMBL, WMBP, & WMBM Wall-Mount Brackets Install Guide (33393)
•
Release Notes (firmware version specific)
For Transition Networks Drivers, Firmware, etc. go to the Product Support webpage at
https://www.transition.com/support/product-support/ (registration / logon required).
For Transition Networks Manuals, Brochures, Data Sheets, Specifications, etc. go to
https://www.transition.com/support/library/ (no registration / logon required).