Transition Networks LANart EFA0201, User Manual

Page: 9 / 12

6. Double Click "Network Adapter"
7. Highlight "LANart…." And , Click on "Properties"
8. Click on "Driver" and Click on "Update Driver"
9. Click on "Next" and choose - "No, Select Driver from List."
10. Click "Next" and Highlight LANart EFA020X Adapter
11. Click "Have Disk"
12. For the NDIS3 MAC driver, type at the prompt:
"A:\Win98\Ndis3\Mac" and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Win98\Ndis4\Mini" and click "OK."
13. Click "OK"
14. Click "Next" and Click "Finish"
15. Click "Yes" to restart the computer. And, when the system comes up open the control panel by
clicking "Start," then "Settings," then "Control Panel."
16. Double Click "system"
17. Click "Device Manager"
18. Double Click "Network Adapter"
19. Highlight "LANart …." And , Click on "Properties"
20. Click on Advance
21. Chose the properties as required by the Network Administrator
22. Restart the computer. Your LANart adapter is now configured. To access your network, protocols
will need to be configured. Please see your network administrator for details.
MICROSOFT WINDOWS NT 4.0 - SOFTWARE UPGRADE
1. Start Windows NT, and open the control panel by clicking "Start," then "Settings,"
then "Control Panel."
2. Double Click on "Network."
3. Click on the Adapters tab.
4. Highlight the existing LANart adapter, and click "Remove." Close the control panel to effect the
change.
5. Re-open the Network control panel, and click "Add," then select "Adapters."
6. Select "Have Disk."
7. Insert the LANart Driver Disk 2 into the floppy drive
8. For the NDIS3 MAC driver, type at the prompt:
"A:\Winnt\Ndis3\Mac" and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Winnt\Ndis3\Mini" and click "OK."