MICROSOFT WINDOWS 95 - NEW INSTALLATION
1.
Copy the appropriate device install script
For NDIS3 MAC driver type
copy A:\Win95\Nids3\Mac\Netamd.inf C:\Windows\Inf
For NDIS4 MINIPORT driver type
copy A:\Win95\Nids4\Mini\Netamd.inf C:\Windows\Inf
2.
Shutdown Windows 95 and power-off the machine.
3.
Install the LANart EFA020X Adapter card in accordance with your personal computer user's manu-
al. Again, follow all handling procedures to avoid electro-static discharges.
4.
Turn the computer on to start Windows 95
5.
If your computer is Plug and Play compatible, Windows 95 will recognize that new hardware has
been installed, and will attempt to configure itself. Follow the steps below. Other wise, Skip to
step 12
6.
Insert the LANart Driver Disk 1 into the floppy disk drive. When prompted for the LANart Win 95
Disk
7.
Type the following path
For NDIS3 MAC driver type -
A:\Win95\Nids3\Mac
For NDIS4 MINIPORT driver type -
A:\Win95\Nids4\Mini
9.
When prompted insert the Windows 95 CD-ROM
10.
Click "Yes"
11.
Remove the LANart driver disk, and power up the computer, and start Windows 95. When system
comes up go to step 19
12.
If your computer is not Plug and Play compatible, open the control panel by clicking "Start," then
"Settings," then "Control Panel."
13.
Open the Network control panel by double clicking the "Network" icon.
14.
Click "Add" inside the Network control panel, then select "Adapter", and click "Add" inside the
Select Network Component Type window. Select "Have Disk."
15
For the NDIS3 MAC driver, type at the prompt:
"A:\Win95\Ndis3\Mac"
and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Win95\Ndis4\Mini"
and click "OK."
16.
Select "OK" to exit the Network control panel.
17.
You will be prompted to insert your original Windows 95 CD. Insert the CD, and click "OK" to
begin copying files.
18.
Restart the computer to and follow steps below.
19.
When the system comes up open the control panel by clicking "Start," then "Settings," then
