background image

Important Information

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify Transduction.

Regardless of  the foregoing statement, Transduction assumes no responsibility for any errors that may

appear in this document nor for results obtained by the user as a result of using this product.

Copyright © 20

15

 Transduction. All rights reserved.

This document is protected by copyright. No part of this document may be reproduced, copied or

translated in any form or means without prior written permission from Transduction.

All other trademarks, brand and product names are the property of their respective owners.

Return policy

Warranty is 3 years for the whole system from the date of purchase.  Products returned for repair must be

accompanied by a Return Material Authorization (RMA) number, obtained from Transduction prior to return.

Freight on all returned items must be prepaid by the customer. The customer is responsible for any loss or

damage caused by the carrier in transit.

To obtain an RMA number, call us at 905-625-1907. We will need the following information:

·

Return company address and contract

·

Model name, model number and serial number

·

Description of the failure

Mark the RMA number clearly on the outside of each box, include a failure report and return the product

to:

Transduction

5155 – 23 Spectrum Way

Mississauga ON Canada L4W 5A1

Attn: RMA Department

TR-LCD1500-ITX

-

7

 User Manual

4

Summary of Contents for TR-LCD1500-ITX-7












































































































Reviews: