Transduction TR-LCD1500-ITX-7, User Manual

Page: 65 / 107

UART Mode Select
This item allows you to select which mode for the
Onboard Serial Port 2.
The choice: IrDA, ASKIR, Normal
(default).
If UART Mode Select is [IrDA] and [ASKIR] will
show:
Phoenix-Award BIOS CMOS Setup Utility
Super IO Device
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [IrDA]
RxD , TxD Active [Hi, Lo]
IR Transmission Delay [Enabled]
UR2 Duplex Mode
Use IR Pins [Half]
[IR-Rx2Tx2]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x EPP Mode Select EPP1.7
x ECP Mode Use DMA 3
PWRON After PWR-Fail [Off]
Item
Help
Men
u
Leve
l ►
↑↓← → ：
Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit F1:General
Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
RxD, TxD Active
The choice:
IR Transmission Delay
The choice: Disabled, Enabled (default) .
UR2 Duplex Mode
The choice: Full, Half (default) .
UART Mode Select
Hi, Hi ……[ ]
Hi, Lo ……[ 2 ]
Lo, Hi …..[ ]
Lo, Lo …..[ ]
 : Move Enter: Accept ESC:
Abort
64 TR-LCD1500-ITX-7 User Manual