1
INTRODUCTION
CHAPTER 1 INTRODUCTION
1.1 Essential Handling Precautions
IMPORTANT. Read this page before unpacking your motherboard!
•••••
Power Supply
Be careful! Always ensure that the computer is disconnected from the power supply
when working on the motherboard and its components.
•
Static Electricity
Static electricity may cause damage to the delicate integrated circuit chips on your
motherboard. Before handling the motherboard outside of its protective packaging,
ensure that there is no static electrical charge in your body. A static discharge
sufficiently strong enough to damage computer components is not perceptible by a
human. To avoid this risk, please observe these simple precautions while handling
the motherboard and other computer components:
1. If possible, wear an anti-static wrist strap connected to a natural earth ground.
2. Touch a grounded or anti-static surface, or a metal fixture such as a pipe or the
chassis of your system, before touching the motherboard.
3. When you have removed the motherboard from its anti-static packaging, try to
hold it only by the edges, without touching any components.
4. Avoid contacting the components on add-on cards, motherboards, and modules
with the gold-colored connectors which plug into the expansion slots.
5. It is safest to handle system components only by their mounting brackets.
6. Keep components which are not connected to the system in the anti-static packaging
whenever possible.
These precautions help to reduce the risk of static build-up and ensure any static discharge
is harmless to your equipment.
TS-AVE3/B
