Transcend TS-AVE3/B Page 54 User Manual Download

Page: 54 / 55

TS-AVE3/B

BIOS SETUP

CHAPTER 4 BIOS UPGRADE

TRANSCEND MODULAR BIOS: AVE3/B-Ver.1.01 11/01/01.

You can see the BIOS description on the third line.

4.2 How to Download the Correct BIOS File from Our Web Site

Please enter the Transcend website at: http://www.transcendusa.com/ On the front page,

click on the ”Motherboard” icon, which is the third item down on the far left. Then click on the

“BIOS” icon. At the next page click on “Update your BIOS manually”. The BIOS page contains

important information. Please take the time to read this page carefully. Choose your motherboard

model. Your BIOS file name must absolutely match the one shown on our web site. Download

the suitable version to your disk or other storage device.

AVE3/B - Ver 1.01 11/01/01

BIOS File Name

(Make sure these charactors are exactly the same as your own
version if you want to upgrade your BIOS.)

BIOS Version 1.01 (V11 for Version 1.1)
(You can upgrade to a newer version if your BIOS version is older
than this version.)

BIOS Generation Date

4.1 How to Check Your BIOS File Name and Version

Please turn on your PC. The first screen will display as follows (For example):

Caution!

Only users familiar with the upgrade procedure are recommended to update the

BIOS of the motherboard and only when there is a need to do so. Please note that

you have to download and install the right file for your motherboard. Otherwise,

you might cause some serious system malfunctions.

Summary of Contents for TS-AVE3/B
























































Search results

Summary of Contents for TS-AVE3/B

Reviews:

Related manuals for TS-AVE3/B

Brands by name

Popular brands

Transcend TS-AVE3/B, User Manual

Search results

Summary of Contents for TS-AVE3/B

Reviews:

Related manuals for TS-AVE3/B

Brands by name

Popular brands