•
AGP Driving Control
This function allows you to adjust the AGP driving force. Choosing ‘Manual’ allows you
key in an AGP Driving Value. We recommend that you set this field to “Auto” to avoid
errors.
•
AGP Driving Value
This field allows you to adjust the AGP driving parameters (from 0000~00FF).
•
AGP Fast Write
Options are: “Enabled” or “Disabled”.
•
OnChip USB
Select “Enabled” if you intend to use any USB device.
•
USB Keyboard Support
Select “Enabled” if you want to use a USB keyboard.
•
USB Mouse Support
Select “Enabled” if you want to use a USB mouse.
•
OnChip Sound
Select “Auto” to enable the OnChip Audio Controller, which lets you use Onboard CODEC
or Add-On CODEC on an AMR card (depends on the JP6 setting). If you use an Add-
On Audio Card with an Audio Controller built-in, please set this field to “Disabled”.
•
OnChip MODEM
Select “Auto” to enable the OnChip MODEM Controller, which lets you use Add-On
MODEM CODEC on an AMR card. If you use an Add-On card with a MODEM Controller
built-in, please set this field to “Disabled”.
•
CPU to PCI Write Buffer
If “Enabled” is selected, writes from the CPU to the PCI bus are buffered to compensate
for the speed differences between the CPU and the PCI bus. If “Disabled”, the writes are
not buffered and the CPU must wait until the write is complete before starting another
write cycle.
•
PCI Dynamic Bursting
When “Enabled”, every write transaction goes to the write buffer. Burstable transactions
then burst on the PCI bus, while nonburstable transactions will write to the PCI bus
immediately.
31
BIOS SETUP
TS-AVE3/B
