HARDWARE INSTALLATION
5
2.3 CPU Installation
•
UNIVERSAL RETENTION MODULE (URM) INSTALLATION
1. Before installing the UNIVERSAL RETENTION
MODULE, pull the supporting EARs 90
o
outward
until you hear a “Click” and both EARs sit upright
in the notches of the main body.
2. Insert the BOARDLOCK BODY into the MAIN
BODY. Then turn the BOARDLOCK BODY
clockwise until it can be turned no more (there is
a stopper device on the MAIN BODY). Then the
BOARDLOCK BODY is secured on the MAIN
BODY.
3. Push the BOARDLOCK PINs all the way down.
The PINs automatically turn to an angle and lock
inside the BOARDLOCK BODYs. Then pull the
PIN back up to the stopper in order for the
BOARDLOCK BODY to be easily inserted into the
PC BOARD. For the ease in installation,
BOARDLOCK BODYs should be inserted into the
UNIVERSAL RETENTION MODULE before it is
installed onto the PC BOARD. Then you only need
to push the BOARDLOCK PINs all the way down
and the MODULE would be set up tightly on the
PC BOARD.
4. When the UNIVERSAL RETENTION MODULE
is installed on the PC BOARD, move the SLIDER
to the LOCK position to lock in the CPU. To
remove the CPU, push the SLIDER down to the
OPEN position to unlock it.
UNIVERSAL RETENTIO
L O C K
O P E N
BOARDLOCK BODY
BOAR
CPU
PC
CPU
BOARD
MAIN BODY
RDLOCK BODY
ON MODULE
EAR
