HARDWARE INSTALLATION
15
Software Power-Off Lead (2-pin SOFT_OFF)
Attach the SOFT_OFF Switch of the panel to this connector.
Pin19
&
Pin20
2.14 Power Connector (20-pin PWR-CONN)
Make sure to plug the ATX power supply connector in the right direction. The pin definition is
shown below. Make sure that your ATX power supply can support at least 720mA on the
standby lead.
Hard disk LED Lead (2-pin HDD_LED)
This 2-pin connector connects to LED of hard disk. The LED lights when a HDD is active.
Pin13 : +5V
Pin14 : GND
Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch.
Pin17
&
Pin18
TS-ABX11/TS-AZX11 Power Connectors
PSON# : Power Supply on
P W R - C O N N
Power Good
+3.3V
+3.3V
Ground
+5.0V
Ground
+5.0V
Ground
+5.0V Standby
+12.0V
+3.3V
-12.0V
Ground
PSON#
Ground
Ground
Ground
-5.0V
+5.0V
+5.0V
Transcend
