32
BIOS SETUP
Primary IDE 0
Primary IDE 1
Secondary IDE0
Secondary IDE1
Floppy Disk
Serial Port
Parallel port
To enable or disable the detection of IRQ 3-7, IRQ 9-15 or NMI
interrupt events for powering down state transition.
These items enable or disable the detection of IDE, floppy,
serial and parallel port activities for powering down state
transition.Actually it detects the read/write to/from I/O ports.
•
LAN Wake Up
This allows you to remotely power up your system through your network by sending a
wake up frame or signal.
NOTE: This feature requires a network interface and an ATX power supply with at
least 720mA +5 V standby power.
•
Ring Wake Up
This allows either setting of “Enabled” or “Disabled” for powering up the computer when
the modem receives a call and the computer is in the soft-off mode.
•
Time Wake Up
This function can power on your computer at a time you have selected.
•
Reload Global Timer Events
When enabled, an event occurring on each device listed below restarts the global timer
for Standby mode.
IRQ[3-7, 9-15],
NMI
