HARDWARE INSTALLATION
11
2.7 Keyboard Wake Up (3-pin KB-AWK
)
This function enables you to use the keyboard to power up the system. Set this jumper to
“Enable” if you wish to use your keyboard to power up your computer.
2.8 Primary / Secondary IDE Connectors (Two 40-pin IDE)
This motherboard supports two 40-pin IDE connectors marked as IDE1 (primary IDE channel)
and IDE2 (secondary IDE channel). Each channel supports two IDE devices which makes a
total of four devices. In order to work together, two devices on each channel must be set
differently to master and slave modes, either one of which a can be hard disk or CD-ROM.
The setting as master or slave mode depends on the jumper on your IDE devices. Please
refer to their manual accordingly. Connect your first IDE hard disk to the master mode of the
primary channel.
TS-ABX11/TS-AZX11 Keyboard Wake Up
1
1
Disable
E n a b l e
1
J P 5
K B - A W K
Transcend
TS-ABX11/TS-AZX11 IDE Connectors
Primary IDE Connector
S e c o n d a ry I D E C o n n e c t o r
P I N 1
P I N 1
I D E 2
I D E 1
Transcend
Note: Make sure that the red
stripe is next to Pin1
