Step1: Install the Processor in Slot 1
Slide the processor into the URM assembly and insert it
in Slot 1, while making sure that the heat sink assembly
is facing towards the chipset, as shown in the figure.
Press down firmly on the CPU until it is fully seated in
the Slot 1 connector.
IMPORTANT: The Slot 1 connector is directionally
keyed and the processor will not go in unless it is
properly oriented. Do Not apply excessive force
when installing the CPU.
Step 2: Lock the CPU in the URM
Lock the processor into the URM by pushing the top-right
and -left latches to the outward position as shown in the
illustration.
Step 3: How to Remove the Processor
(A) Unlock the CPU by pushing the top-right and -left
latches inward.
(B) Push both slides on the URM right and left branches
downward.
(C) Remove the processor by pulling it upward while
holding the two slides in the down position.
HARDWARE INSTALLATION
7
•
The Intel Processor Installation
A B C
