5.2.2 LF (Line Feeds) Number Entry (A9)
1. While in the User Menu mode, scroll to "
A 9
", then scroll down once using the
ZERO key to enter the Line Feeds menu.
2.
The display will momentarily show "
LF
", followed by the current line feeds value.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual line feeds value. Increase the flashing digit by pressing the
UNITS key. Decrease the flashing digit by pressing the ZERO key. Pressing the
PRINT key or the TARE key will change the position of the flashing digit.
4. After setting the exact value, press the NET/GROSS key to save the line feeds
value. The display will show "
SET
" momentarily, then revert back up to A9.
Page 5-4
