Transcell Technology SRP-300, Operation Manual

Page: 4 / 8

2
Keyboard Functions
lb
kg
ZERO
NET
GROSS
Toggles between lb and kg
units if this key is enabled in
the User Menu.
Sets indicator to display "0"
when in Gross mode, and
within zero band range.
Toggles between Gross and
Net weight display.
Zero G N lb kg Motion
ZERO
NET
GROSS
TARE PRINT
Tare
CAPACITY :
300x0.1 lb
150x0.05 kg
lb
CLASS
max
= 3000 n
kg
SRP SERIES FRONT PANEL
TARE
Used to zero a weight indication in Net mode.
PRINT
Sends "Print" data to printer if scale is stable and not in overload. Not active when "Continuous" option
is selected in User Menu.
Configuration
All Serial Communication parameters are
embedded in a user menu consisting of 5
separate menu selections, each with its own
sub-menu of choices. If your scale is con-
nected by RS-232 serial communication
lines to other equipment, or you wish to dis-
able the
lb/kg key, you may have to modify
some or all of these parameters.
To modify these parameters, you must first
enter the USER MENU mode. Once there,
four of the front panel keys become direc-
tional navigators to move around in the
menus, and one key is used to save or SET
the selections. Complete directions are
found below.
To place the unit in USER MENU mode:
1. Turn the scale off.
2. While holding down the
lb/kg
key, turn the scale back on.
3. When the display shows " A1 ",
the unit is in USER MENU
mode, and you can release the
lb/kg key. Shown at right are the
directional and SET key assign-
ments.
Zero G N lb kg Motion
SET
Tare
CAPACITY :
300x0.1 lb
150x0.05 kg
CLASS
max
= 3000 n