Neptune 6500
6
NEPTUNE 6500-20
20lb (10kg) 12"W x 12" L
NEPTUNE 6500-100
100lb (50kg) 18
”
W x 18
”
L
NEPTUNE 6500-50
50lb (25kg) 12"W x 12" L
NEPTUNE 6500-200
200lb (100kg) 18
”
W x 18
”
L
TABLE 1-1: Product Matrix
CHAPTER 2: GETTING STARTED
Step 1. Position the scale in its area of intended use. Observe the following guidelines for
suitable location.
1. Choose a firm, stable floor or table.
2. Do not share an AC outlet with electrical noise producing equipment, such as
refrigeration units. This includes products with electrical motors and/or relays.
3. Do not place the scale in an area with changing ambient temperature and/or high
humidity.
4. Do not place the scale in an area prone to exposure to direct sunlight, wind, or dust.
5. Do not place the scale in an area with vibrating equipment.
Step 2. If applicable, install the serial printer to the COM1 serial port.
Connect the printer to the COM1 port using the optional serial cable. See Appendix B for
cabling requirements
and pin outs.
Configure the communication parameters and select the device type as detailed in
Section?
Configure the formatting parameters for the printer as detailed in Section? .
Set the current Time and Date as detailed in Section?
Step 3. Plug in the three prong connector to a standard 110 Volt A/C outlet, the scale will then
power on to begin use.
2.1 INSTALLATION
2.1.1 STAINLESS STEEL ENCLOSURE (NEPTUNE 6500)
The 6500 is contained in a NEMA 4X stainless steel enclosure, the rear cover must first be
removed to make the appropriate connections to the weigh platform, printer, remote display
and power supply. To remove the rear cover, simply remove the screws that secure it to the
enclosure and set aside.
Summary of Contents for Neptune-6500 Series
Page 31: ...Neptune 6500 31...
