TransAct ITHACA 9800, Maintenance Manual

Page: 22 / 70

Safety Precautions
Page 12 100-13732 - Rev B

Never pull on the power cord to unplug the cord from the power supply.
Always grip the plug to remove it from the power supply.

If the printer will not be used for a long period, disconnect the power cord
from the power source.

Always keep the area around the power plug free of obstacles so that you
can unplug it easily. This allows you to unplug the power cord quickly in an
emergency.

Never use any power source other than the one rated for the printer. This
printer is designed to be used in the region where you purchased. Also,
make sure that the power source can supply sufficient power for the
printer.
Supply Voltage:
AC 90-265 V, 47-63 Hz
Handling the Printer and Accessories
To avoid the risk of fire, electrical shock, personal injury, or damage to the
printer:

Never clean the printer with water or any flammable liquid (alcohol,
benzene, thinner, etc.) either applied directly or with a cloth. If you
accidentally spill liquid on the printer, switch the printer off immediately,
disconnect the power plug from the power source, and call for service.

If the printer emits smoke, unusual odors, or makes noises, leaving it could
cause a fire or serious electrical shock or damage to the printer. Switch the
printer off immediately, disconnect the power plug from the power source,
make sure that the printer has stopped smoking, and call for service. Do
not attempt to repair the printer by yourself.

Use only a slightly damp cloth, thoroughly wrung out, to clean the printer
surfaces. Never use alcohol, thinner or any other flammable liquids, or risk
having them come into contact with electrical components inside the
printer.

There are high voltage points inside the printer. Never attempt to
disassemble or repair the printer.

Never insert or drop any metal objects into the printer when it is open. This
could cause a fire or serious electrical shock, or damage the printer. If
something falls into the printer accidentally, switch the printer off
immediately, disconnect the power plug from the power source and call for
service.

If the printer is dropped and damaged, switch the printer off immediately,
disconnect the power plug from the power source, and call for service.

Never use flammable sprays around the printer.

Never remove the cover from the printer.

Before cleaning the printer, switch it off and disconnect the power plug
from the power source.