TransAct Ithaca 8000, Programmer'S Manual

Page: 39 / 318

100-06908 Rev D Page 25
1 Vbus (+5 V dc) (Not used in the Ithaca
®
8000)
2 Minus data
3 Plus data
4 Ground
Note: The standard USB interface does not have enough power to run the
printer.
Ethernet 10-Base-T adapter
An IP addressable 10-Base-T Ethernet adapter is available for the Ithaca
®
8000 printer.
It provides for web page configuration and supports bi-directional RAW and Telnet
interfaces. All protocols are implemented to the extent necessary to support printing
from Windows™ platforms; specific protocols supported include the following:
Line Printer Daemon Protocol (LPR)
– RFC1179
Simple Network Management Protocol (SNMP)
– RFC1157
Printer MIB
– RFC1759
Port 9100 (Raw data)
Service Location Protocol (SLP)
– RFC2165
The TFTP Protocol (Revision 2)
– RFC1350
Telnet COM Port Control Option
– RFC2217
Hypertext Transfer Protocol
– HTTP/1.1 – RFC2616
Refer to the 100-05072 Wired Ethernet
Programmer‘s Guide for features and additional
setup information.
Note: The Ethernet adapter supports only the Ithaca Cash Drawer
interface.
802.11b Wireless Interface
An 802.11b wireless interface is available for the Ithaca
®
8000 printer, allowing wireless
operation of the printer within a specified distance of a base unit. Contact TransAct
technical support for more information on this interface.