TransAct Ithaca 8000, Programmer'S Manual

Page: 106 / 318

Programming Codes Ithaca
®
8000 Programmer’s Guide
Page 92 Rev D 100-06908
[ESC] ^ Print control character
ASCII [ESC] ^ <n>
Hexadecimal 1BH 5EH <n>
Decimal <27> <94> <n>
IPCL &%CC <m1> <m2> <m3>
EPOS [ESC] ^ <n>
Description The [ESC] ^ <n> command allows characters from zero to 31 codes to be
printed. During normal operation, characters from zero to 31 are control
characters. The command turns off control code translation for the
following character. <n> can be from zero to 255.
[ESC] [ C Insert Euro character
ASCII ESC] [ C <n>
Hexadecimal 1BH 5BH 43H <n>
Decimal <27> <91> <67> <n>
IPCL &%EU
Description The [ESC] [ C <n> command allows an application to replace any
character in the currently active character set with the Euro character.
The character to be replaced is defined by <n>. For example, if the
currently active character set is CP 850 (multi-lingual) and 0D5H
character is to be the Euro character, "1BH 5BH 43H 0D5H" replaces the
character at 0D5H with the Euro symbol.
Euro Character Substitution Matrix
Name Epson IBM Code Page Insertion Point (hex)
850 26 850 0xD5
Turkey 857 57 857 0XD5
Win Cyrillic 52 1022 0X88
Win Turkish 51 1021 0X80
Win Greek 50 1020 0X80
Win Hebrew 62 1032 0X80
Win Baltic 68 1034 0X80
Table 16 Euro Character Substitution Matrix