TransAct Ithaca 280, Programmer'S Manual

Page: 195 / 318

Programming Codes iTherm
®
280 Programmer’s Guide
28-04430 Rev K Page 183
Supported TM-T88 Commands
Miscellaneous Commands
Command Name Page
DLE DC4 <1> 10H,14H,01H Generate pulse in real-time 224
DLE DC4 <2> 10H,14H,02H Execute power-off sequence 224
DLE DC4 <8> 10H,14H,08H Clear buffers 225
ESC = 1BH,3DH Select peripheral device status 225
ESC @ 1BH,40H Initialize printer 223
ESC p 1BH,70H Generate pulse 224
GS ( A 1DH,28H,41
H Enter Test Mode 227
GS I 1DH,49H Transmit printer ID 223
GS P 1DH,50H Set horizontal and vertical motion units 223
GS b 1DH,62H Turns smoothing mode on/off 200
GS c 1DH,63H Print counter 227
GS g 0 1DH,67H,30
H Initialize maintenance counter 227
GS g 2 1DH,67H,32
H Transmit maintenance counter value 228
Macro Function Commands
Command Name Page
GS : 1DH,3AH Start/end macro definition 229
GS ^ r t m 1DH,5EH Execute macro 229
Page Mode Commands
Command Name Page
FF 0CH Print and return to standard mode 81
CAN 18H Cancel print data in page mode 216
ESC FF 1BH,0CH Print data in page mode 219
ESC L 1BH,4CH Select Page mode 217
ESC S 1BH,53H Switches from page mode to standard
mode 217
ESC T 1BH,54H Select print direction in page mode 217
ESC W 1BH,57H Set printing area in page mode 217
GS $ 1DH,24H Set absolute vertical print position in page
mode 219
GS \ 1DH,5CH Set relative vertical print position in page
mode 219
User-defined Memory Commands
Command Name Page
GS * 1DH,2AH Define single user-defined bit-image 233
GS / 1DH,2FH Print single user-defined bit-image 234
Table 21 Supported TM-T90 Commands