TransAct Ithaca 280, Programmer'S Manual

Page: 143 / 318

Programming Codes iTherm
®
280 Programmer’s Guide
28-04430 Rev K Page 131
Bar Codes
The iTherm
®
280 Printer supports the ability to print bar codes. The printer offers a number of
formats as defined below. The host does not need to form the graphic image for these bar
codes. The host need only send the printer the information to be bar coded and a graphic is
generated by the printer. In some cases, a check character is required by the format. In most
cases, the printer generates the check character and inserts it correctly in the format. The
printer uses internal graphic modes to form bar code images, and the images are adjusted for
ink bleed. In general, the bar codes generated by sending graphic data to the printer are not as
readable as the bar codes the printer generates. Bar codes are printed at a 203 x 203
resolution.
Barcodes may be printed horizontally or vertically. When printed vertically the length of the
barcode can be greater (i.e. more characters can be printed). You can not print human readable
interpretation (HRI) characters in vertical mode. It is generally better to print vertical barcodes by
printing horizontal barcodes in page mode rotated 90

or 270

. You can then mix HRI and other
text with the barcodes.
Function Print bar code
ASCII [ESC] b <n> {information} [ETX]
Hexadecimal 1BH 62H <n> ... 03H
Decimal <27> <98> <n> ... <3>
IPCL &%25 ... [CR] Interleaved 2 of 5
&%39 ... [CR] Code 39
&%12 ... [CR] Code 128
&%28 .<m
1
> <m
2
> Code 128 (allows a two character length,
preceding the information)
&%UP ... [CR] UPC A
&%UE ... [CR] UPC E
&%EA .. [CR] EAN-13
&%E8 ... [CR] EAN-8
&%93 .. [CR] Code 93
&%CB .. [CR] Codabar
EPOS [ESC] b <n> or [GS] k <n>
Description The [ESC] b <n> {information} [ETX] command prints information as a bar code.
The bar code is centered on the print zone.
Where n = 0 Interleaved 2 of 5 Numeric (0-9) only; must be even number of digits
1 Code 39 26 uppercase letters (A-Z); 10 digits (0-9)
(See description for full 128 character set support)
2 Code 128 Three sets of 106 different characters
(See description for character set selection)
3 UPC A Numeric (0-9) only; 11 digits
4 EAN-13 Numeric (0-9) only; 12 digits
5 UPC E Numeric (0-9) only; 11 digits
6 EAN-8 Numeric (0-9) only; 7 digits
7 Code 93 26 letters; 10 digits (0-9); and 7 special characters
8 Codabar 10 digits (0-9); 4 start/stop characters,
A, B, C, and D; and 6 special characters.