TransAct Ithaca 280, Programmer'S Manual

Page: 198 / 318

Programming Codes iTherm
®
280 Programmer’s Guide
Page 186 Rev K
Supported TM-T90 Commands
Paper Sensor Commands
Command Name Page
ESC c 4 1BH,63H, 34H Select paper sensor(s) to stop printing. 202
ESC c 3 1BH,63H, 33H Select paper sensor(s) to output paper out
signals. 203
ESC c 1 1BH, 63H,
31H Select paper types for command settings 216
ESC c 0 1BH, 63H,
30H Select paper types for printing 215
Print Position Commands
Command Name Page
BS 08H Set back space 205
HT 09H Set horizontal tab positions 205
ESC $ 1BH,24H Set absolute print position 204
ESC < 1BH,3CH Return home 207
ESC D 1BH,44H Set horizontal tab positions 206
ESC Q 1BH,51H Set right margin in characters 207
ESC U 1BH,55H Turn on/off unidirectional printing mode 206
ESC \ 1BH,5CH Set relative print position 204
ESC a 1BH,61H Select justification 205
ESC l 1BH,6CH Set left right margin in characters 207
GS L 1DH,4CH Set left margin 206
GS T 1DH,54H Set print position to the beginning of the
line 204
GS W 1DH,57H Set printing area width 206
Bit-image Commands
Command Name Page
ESC * 1BH,2AH Select bit-image mode 208
GS v 0 1DH,76H,30H Print raster bit image 208
Status Commands
Command Name Page
DLE EOT 10H,04H Transmit real-time status 212
DLE ENQ 10H,05H Real-time status request to printer 226
ESC u 1BH, 75H Transmit peripheral status 213
ESC v 1BH, 76H Transmit paper status 214
GS a 1DH,61H Enable/disable automatic status back
(ASB) 209
GS r 1DH,72H Transmit status 211