Overview
MUA-SVX01A-EN
© 2007 American Standard Inc. All rights reserved
Overview of Manual
Note: One copy of this document ships inside the control panel of each unit and
is customer property. It must be retained by the unit’s maintenance
personnel.
This booklet describes proper installation, operation, and maintenance
procedures for air cooled systems. By carefully reviewing the information within
this manual and following the instructions, the risk of improper operation and/or
component damage will be minimized. It is important that periodic maintenance
be performed to help assure trouble free operation. A maintenance schedule is
provided at the end of this manual. Should equipment failure occur, contact a
qualified service organization with qualified, experienced HVAC technicians to
properly diagnose and repair this equipment.
Hazard Identification
Warnings and Cautions appear at appropriate sections throughout this manual.
Read these carefully.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury. It may also be used to alert against unsafe practices.
CAUTION
Indicates a situation that may result in equipment or property-damageonly
accidents.
Model Number
All products are identified by a multiple-character model number that precisely
identifies a particular type of unit. An explanation of the alphanumeric
identification code is provided. Its use will enable the owner/operator, installing
contractors, and service engineers to define the operation, specific components,
and other options for any specific unit. When ordering replacement parts or
requesting service, be sure to refer to the specific model number and serial
number printed on the unit nameplate.
