40
RLC-SVX023B-GB
Periodic Maintenance
Contractor Confi rmation Check Sheet
This check sheet must be completed by the installing contractor and submitted prior to requesting Trane Service
start-up support. The check sheet identifi es a list of items that need to be completed prior to actual machine start-up.
Contractor Con
fi
rmation Check Sheet
Addressed to the Trane Service of
fi
ce of:
Job Name:
Job location:
Model No.:
Sales order No.:
Unit
Cooling water
❏
Unit installed
❏
Connected to the unit
❏
Isolator pads in place
❏
Connected to the cooling device
Chilled Water
❏
Connected to the pumps
❏
Connected to the unit
❏
System
fl
ushed and then
fi
lled
❏
Connected to the air handling units
❏
Pumps run and air bled
❏
Connected to the pumps
❏
Strainers cleaned
❏
System
fl
ushed and then
fi
lled
❏
Flow switch installed and checked/set
❏
Pumps run and air bled
❏
Throttling cock installed in leaving water
❏
Strainers cleaned
❏
Thermometers installed in leaving/entering water
❏
Flow switch installed and checked/set
❏
Gauges installed in leaving/entering water
❏
Throttling cock installed in leaving water
❏
Cooling water control operational
❏
Thermometers installed in leaving/entering water
❏
Water treatment equipment
❏
Gauges installed in leaving/entering water
Wiring
❏
Power supply connected and available
❏
External interlock connected
Load
❏
System can be operated under load condition
We will therefore require your service technician on job by*_____________________.
Checklist completed by____________________________________________________.
Date____________________________________________________________________.
* Return this completed checklist to your Trane Service offi ce as soon as possible to enable the start-up visit to
be scheduled. Be aware that advance notifi cation is required to allow scheduling of the start-up as close to the
requested date as possible. Additional time required to complete the start-up and adjustment due to incompleteness
of the installation will be invoiced at prevailing rates.
