Trane BAYEVAC05BK1A, Installer'S Manual

Page: 2 / 16

Page 2
INSTALLER'S GUIDE
This electric heater accessory is designed to provide
power directly to the air handler from the accessory
heater's power supply, eliminating the need for addi-
tional circuits. The power and control wiring each use
a single wire harness to connect the heater and the air
handler.
1. Check the heater nameplate to confirm that the selected
heater is approved for use with the air handler.
2. Check the components received for damage. Report any
defects or shortages to the transportation company im-
mediately.
3. Be sure the power supply matches the listing shown on
the heater nameplate.
Section 2. General Information
Section 3. Heater Assembly Labeled
8/10 kW breaker model illustrated
Width Adjustment Brackets
Heater Baffle
Heater Rack
Non-Cyclic Thermal
Limit Switch
Breaker Bracket
(LG heater terminal bracket differs)
Ground Lug
(LG heater has terminal lug)
Circuit Breaker
(Breaker models only)
Seal Plate
(Breaker models only)
- In document pack
Electric Heat
Control -
Communicating
Electric Heat
Control Platform
Nameplate
Edge Guard
- In document
pack
Base Plate
Cyclic Thermal
Limit Switch
Filler Plate
Filler Plate
Retainer Tab and
Screw
- In document pack
Retainer Tab and
Screw
- In document pack
Heater Element
Terminations
Wiring diagram not shown