Copyright © 2005
– 2021 R. STAHL TRANBERG AS. All rights reserved. Page 9 of 38
Flashing red: The output channel (relay) reports a malfunction (broken fuse or
lamp) on the spare output (e.g. spare lantern). The buzzer will sound. This is an
unacknowledged alarm. When pressed at this stage, the button will light up with
a continuous red light.
Continuous red light: The spare output is defect. The panel must be turned off to
reset this state.
Depending on the configuration, a single push on a button may turn on or off a number
of outputs (and panel LEDs) to accommodate the needs. This yields a high density in
functionality, while simplifying the tasks of the user. As an example, one press on a
single button may ‘remote’ operate a selection of other buttons, as if the user pressed
each and one of these. In any case the user will have control over each single button
by turning this on or off.
See the two chapters Button and led status and Button state diagram over the next two
pages.
