3.8
Adding FX
In this tutorial section, we will walk you through the basics of using the FX Units. By default,
TRAKTOR provides you with control over two FX Units, which can be assigned to any of the
Decks. You can set up two types of FX: Single FX and Group FX. The following sections will
explain both.
With a second TRAKTOR KONTROL D2 controller you can enhance the full potential of
TRAKTOR and your mixing abilities due to simultaneous control of all Decks and FX Units.
3.8.1
Assigning Decks to the FX Units
The FX Unit at the top of the D2 controls either FX Unit 1 or FX Unit 2 of the TRAKTOR soft-
ware. This depends on the current Deck control:
• When the Deck control is currently on Decks A and C, the FX Unit controls FX Unit 1 of
the TRAKTOR software.
• When the Deck control is currently on Decks B and D, the FX Unit controls FX Unit 2 of
the TRAKTOR software.
To assign the Decks A and C to the active FX Unit:
►
Press the FX Assign buttons
A
and
C
. The buttons light up brightly.
To unassign the Decks A and C to the active FX Unit:
►
Press the FX Assign buttons
A
and
C
again.
Using Your D2—Getting Advanced
Adding FX
TRAKTOR KONTROL D2 - Manual - 90
Summary of Contents for KONTROL D2
Page 1: ...Manual...
Page 134: ...Track Deck Track Deck View Hardware Reference The Deck TRAKTOR KONTROL D2 Manual 134...
Page 136: ...Remix Deck Remix Deck View Hardware Reference The Deck TRAKTOR KONTROL D2 Manual 136...
Page 151: ...USB Hub Hardware Reference The Rear Panel TRAKTOR KONTROL D2 Manual 151...
