Pads illuminated in Loop Mode.
Prerequisites
We assume here that the D2 is in the following state:
• The track “Techno 1” is loaded on Deck A and is not playing.
3.3.1
Looping with Pre-defined Sizes
In LOOP mode, with the first row of pads you can engage loops with pre-defined values. By
default, these are (from left to right) 1/8, 1/4, 1/2 or 1 beat.
To engage a loop:
1.
Press the
PLAY
button to start playback.
2.
Press the
LOOP
button to enable LOOP mode.
The LOOP button lights up brightly and the pads also illuminate.
With a track playing and LOOP Mode enabled, you can perform the following actions:
Using Your D2—Getting Advanced
Playing with Loops in LOOP Mode
TRAKTOR KONTROL D2 - Manual - 60
Summary of Contents for KONTROL D2
Page 1: ...Manual...
Page 134: ...Track Deck Track Deck View Hardware Reference The Deck TRAKTOR KONTROL D2 Manual 134...
Page 136: ...Remix Deck Remix Deck View Hardware Reference The Deck TRAKTOR KONTROL D2 Manual 136...
Page 151: ...USB Hub Hardware Reference The Rear Panel TRAKTOR KONTROL D2 Manual 151...
