manualshive.com logo in svg

Traktor KONTROL D2, Manual

Share
Download
Traktor KONTROL D2 Manual Download Page 106

2.

Turn a Performance knob clockwise to apply hi-pass filtering to the playing Sample. Turn
a Performance knob counterclockwise to apply the low-pass filter to the playing Samples
individually.

→

You will hear the result in the audio and see the values change in the 

FILTER

 parameters

overview.

3.9.4

Using Performance Mode FX SEND

 

The  Performance  Mode  FX  SEND  allows  you  to  send  signal  from  each  Remix  slot  to  the  as-
signed FX Unit/s. In this case, Deck C is assigned to FX Unit 2, which is set up as a Reverb. As
soon as the 

ON

 Buttons are enabled in this Performance Mode, the audio effect from FX Unit

2 should become audible.
When Performance Mode FX SEND is enabled:

Using Your D2—Getting Advanced

Using Performance Modes on Remix Decks

 

TRAKTOR KONTROL D2 - Manual - 106

Summary of Contents for KONTROL D2






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands