manualshive.com logo in svg

Traktor KONTROL D2, Manual

Share
Download
Traktor KONTROL D2 Manual Download Page 150

4.4.3

POWER Section

 

POWER Section

In the 

POWER

 section, you make the connection to the power supply and to your computer:

(1) Power Supply connector (15V - 2.66 A): connect the included power supply.
(2) ON/OFF switch: press this switch to turn your device on or off.

Do not use the TRAKTOR KONTROL D2 with a power supply other than the one included in
delivery. In case of loss or damage, make sure to purchase a replacement power supply ap-
proved by Native Instruments for use with the D2.

Before  you  use  the  power  supply  and  connect  to  the  D2,  please  refer  to  the  TRAKTOR
KONTROL  D2  IMPORTANT  SAFETY  INSTRUCTIONS  leaflet  (included  in  the  box).  This
leaflet explains how to attach the specific adaptor plug for your region.

Only use the power supply splitter cable to power a second TRAKTOR KONTROL D2 unit.
Powering another device may damage your devices.

4.4.4

USB Hub

 

The USB 2 Hub provides additional connectivity for using further equipment such as TRAK-
TOR controllers and audio interfaces.

Hardware Reference

The Rear Panel

 

TRAKTOR KONTROL D2 - Manual - 150

Summary of Contents for KONTROL D2






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands