67
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK VMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
Note:
If you are working with the SWI Customer Service Group, write the values down for Code 33.
These values will be valuable for troubleshooting.
4.8.1.1 CODE 33: Software ID
The Code 33 is the software identification procedure. This will most likely be used when a customer
service representative asks to identify what version(s) of software is being run on your machine.
4.8.1.2 CODE 141: Load Configuration File from USB flash drive
This code allows you to load your configuration file from a USB flash drive to
your machine’s compact
flash drive. The configuration file consists of items such as calibration, backlash constants, ball lock
locations, base tool length and tool changer height. This code is useful when a computer module or
compact flash card has been replaced, and you want to restore a machine to its previous state.
In order to load the files correctly on the VMC, you must have the file
name will be of the format “R
MX
Configuration Machine ID” where machine ID is the number of the VMC
.
4.8.1.3 CODE 142: Save Configuration File to USB flash drive
This code allows you to save your configuration file to a USB flash drive. The configuration file consists of
items such as calibration, backlash constants, ball lock locations, base tool length and tool changer
height. This code is used when a computer module or compact flash card needs to be replaced. This
stores the configuration file from the machine’s compact flash dr
ive to a portable USB flash drive. It is a
good idea to do this code after the machine is initially setup so these values can be saved and used in the
future. If the computer or compact flash card fails, then you will not have the ability to save the
configuration file and the machine will need to be re-setup when the computer or compact flash drive is
replaced.
4.8.1.4 CODE 316: Update Software
Insert the USB flash drive that contains the software update and press this service code. New software
will automatically download and the control may need to be shut down if prompted.
4.8.1.5 CODE 318: Activate Converters or Options
This service code will allow you to check the status of, or activate any available converter or option for
the machine.
4.8.2 Section B - Machine Set-Up Code Details
The following codes are used primarily when setting up a new machine. To get to any of these codes go
to Service Codes, press “B” and press the code you wish to view.
4.8.2.1 CODE 123: Calibration
See Section 5.3 for a further explanation of this code.
4.8.2.2 CODE 128: Input Backlash Constant
Code 128 allows you to enter the backlash values for each axis. It displays the value after it is entered.
