52
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK VMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
Possible Cause
Check This
Jumper may have come loose
Check removable jumper is in place and connected
properly as shown below:
If connected, restart VMC.
Computer module internal failure
Make sure both E Stop jumper lights are on. If either is
off, computer module failure, call TRAK for service. If
both are on, more to next step.
Computer module internal failure
Check E-Stop lights in electric cabinet, make sure 2
LEDs are on as shown below:
Either light off, computer module failure, call TRAK. If
both are on, move to next step.
