48
TRAK Machine Tools
Southwestern Industries, Inc.
Airwolf EVO 3D Printers - Installation, Printing, Maintenance & Troubleshooting Manual
6.0
Troubleshooting
This section covers the steps to take when trying to fix your printer, when you encounter issues.
When dealing any troubleshooting issues, the first immediate steps we recommend are the following:
•
Always run the latest firmware Version, or check for firmware Updates
•
Always run the latest version of Apex Slicer Software, or check for software updates on Apex
Slicer.
•
Always print your Euclid Block, using dried MG94 ABS (natural color), and the G-Code stored onto
your printers Internal Drive.
6.1
Running Out of Filament
Steps
Images
1.
Pre-heat nozzle to required temperature,
by selecting PREHEAT.
2.
Then select the material you plan on
loading.
3.
Select the nozzle that you are
troubleshooting.
4.
Insert new filament into feeder.
For instructions on Loading Filament, see
Printing section.
5.
Once the nozzle reaches the target
temperature, select Filament Control
NOTE
- Feeder will not operate under
175°C.
6.
Press PRIME. PRIME will slowly feed new
filament into the feeder.
CAUTION
–
Do not press LOAD, as it will
force new filament in too fast and
potentially jam.
