15
TRAK Machine Tools
Southwestern Industries, Inc.
Airwolf EVO 3D Printers - Installation, Printing, Maintenance & Troubleshooting Manual
3.4.1.2.
External Components
Component & Description
Images
Top View
1.
Glass Cover
–
Lays on top of the printer,
and can be removed for better access to
the Print Head, when changing filaments.
Side View
2.
Power Switch
–
Use to power your
printer on/off.
3.
LCD (Primary) USB Port
–
This is
where you insert your USB drive that you
load your G-Code files onto. It can also be
used to transfer new software and
firmware updates, if your printer is not
connected to your network, and can work
as an external hard drive.
NOTE
–
Although there is an embedded
keyboard, you may also connect your
keyboard here to type.
NOTE
- This is NOT the place to plug in
your PC to control the printer (see
below).
Rear View
1.
Power Inlet
- The Printer Power Cord
plugs in here and connects to the power
supply from the wall.
2.
Ethernet Port
–
Use to connect to the
internet through a wired connection. This
is only for performing updates - there is
no network control available at this time.
3.
(Backup) USB Port
–
The backup USB
port can be used for PC-control, which
means you can stream the G-Code to
print through a PC to the printer.
NOTE
–
This connection can be
interrupted by a computer freeze, update,
restart, etc., so, it may not be as stable
as using the primary USB, and saving the
file directly to the internal drive.
