www.TrailFX.com
Page
3
of
5
Rev 012219
Bumper Installation
1.
Remove the fog light from the vehicle. Use the OEM screws and nut plates to fasten the fog light to the bumper
(Fig 3)
.
2.
Attach the license plate to the Replacement Bumper
(Fig 4)
. Fasten the license plate with the hardware.
3.
Fasten the provided Towing Hooks to thg Bumper with the hardware
(Fig 5A & 5B & 5C)
.
Fig
3
Fig
4
(1)5mm Lock Washers
(1)5×15×1.2mm Flat Washer
(1)5mm Hex Nut
(1)5×15×1.2mm Flat Washer
(1) 5×20 Phillips Screw
Fig
5A
(2)12×60mm Hex Bolts
(4)12×24×2.5mm Flat Washer
(2)12mm Lock Washer
(2)12mm Hex Nut
