Page 10
Installation
(Continued)
1.
Monitor
. The monitor can be fixed to the windscreen in a suitable location
(ideally not within the sweep of the windscreen wipers), which does not block the
view of the road/outside. The monitor is powered via the Cigarette Lighter Power
Adapter ('hard-wire' monitor power adapters are available separately).
2.
Camera(s).
The camera
(s) are fixed to the vehicle via the supplied screws/
bolts/brackets & should be located in suitable viewing locations. The cameras can
be powered via a lighting circuit etc (i.e. the reversing camera could be powered
via the reversing lights, or via the side-lights if utilised as a 'rear view mirror' and
any interior camera could be powered via the internal lights, or light switch).
PLEASE NOTE: Cameras can also be powered by battery packs (available
separately) and fixed via mag-mounts (available separately).