User Interface (Continued)
Pairing:
Select the camera/CH for pairing (via the
CAM
button) and then select
pairing... a 60 second on-screen countdown begins, within 60 seconds apply power
to the camera to be paired (cameras automatically go into pairing mode when
switched on, if not already paired).
PLEASE NOTE:
Cameras are pre-paired to the monitor, so pairing is only required if a new camera is added to the system etc.
Picture:
Brightness,
C
ontrast,
Hue and V
olume
adjustment
. After entering the
PICTURE interface, use the left and right
(up/down)
buttons to switch to the
parameter that needs to be adjusted (yellow). Press the
Menu
button to begin
changing the parameter that needs to be adjusted (red) using the left and right
(up/
down)
buttons.
MIR-FLIP:
Normal
image, mirror image, vertical
normal
image, vertical mirror image.
CAM-SETUP:
Turn camera/CHs off and on (i.e turn off 3 CHs if only 1 camera is
utilised). Auto Scan: Enable automatic view/scan of all powered/paired cameras.
Scan Time: S
et the duration of current
view/camera
before the
monitor
displays
the
next view
/camera.
Page 1
2
