Trailer Valet RVR12 Operating Manual Download Page 3

3

IMPORTANT SAFETY INFORMATION

Failure to heed these markings may result in personal injury and/or property damage:

1.  DO NOT use the RVR on slopes and inclines beyond stated limits. 

2.  Avoid getting the RVR wet. DO NOT submerge the RVR in water (salt or fresh). 

3.  Carefully read all instructions. The operator of the RVR must exercise 

common sense, caution, and full judgment when assessing situations not 

covered or cautioned in this manual. 

4.  The RVR is designed for specific applications only. Trailer Valet will not be 

responsible for issues arising from modifications made onto the device. Do 

not modify the device or use the device for any application other than its 

intended purpose. Do not exceed the designated weight limits. 

5.  Stay alert! Do not operate if you are tired. Do not operate the device while 

under the influence of drugs or alcohol. 

6.  Do not allow the RVR to be operated by children. 

7.  Operator and bystanders should never place any part of the body under or in 

the path of any portion of this product or the load being supported or moved. 

8.  This product must be installed and used in strict accordance with these 

instructions. 

9.  Before each use of the RVR, check for functionality and charge. Carefully 

inspect the device for any part that appears to be damaged to determine if 

the device will operate properly. If the device is neither charged, secured, or 

both: DO NOT use the device. 

10. When servicing, use only factory replacement parts. 

11. Have wheel blocks in place before/after use and ready in case of emergency. 

12. Never exceed the maximum rated capacity. Refer to the operating manual 

or decals on the product to obtain rated capacity. If uncertain, contact 

Customer Support at (844) 846-9344 or email: [email protected]

13. The RVR is designed for vertical loading. Excessive side forces may cause 

failure and must be avoided. 

14. The use of gloves is recommended while attaching the device to the trailer. 

15. The RVR is designed for use on solid surfaces. DO NOT use the product 

on excessively soft or muddy terrain as the device will not be able to gain 

traction. If there is no traction despite being on a solid surface, consider 

shifting more of the weight of your trailer forward.

SAVE THESE INSTRUCTIONS

Summary of Contents for RVR12

















Reviews: