background image

15

LIMITED MANUFACTURER’S WARRANTY

SuperTech S Corp warrants for one year from the purchase date that the product will 

be in working condition and will be free from manufacturing defects, provided that 

installation and use of the product is in accordance with product instructions. This 

warranty is only made to the original consumer purchaser and is non-transferable. 

ALL OTHER WARRANTIES IMPLIED OR EXPRESSED ARE HEREBY DISCLAIMED.
THIS WARRANTY DOES NOT COVER: 

1.  Normal wear and tear or normal aging of the product;

2.  Consumable parts designed to diminish over time, unless failure occurred due to 

a manufacturing defect;

3.  Cosmetic damage, including but not limited to scratches and dents;

4.  Damage through accident, abuse, neglect, misuse, natural events, or other 

external causes;

5.  Damage through misapplication, overloading, or improper installation;

6.  Damage due to improper maintenance and repair; and/or

7.  Product alterations.

LIMITATION OF LIABILITY:

EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT 

PERMITTED BY LAW, SUPERTECH IS NOT RESPONSIBLE FOR ANY DIRECT, 

INCIDENTAL, CONSEQUENTIAL DAMAGES, OR INJURIES RESULTING FROM ANY 

BREACH OF WARRANTY OR CONDITION; INCLUDING, BUT NOT LIMITED TO, LOSS 

OF USE, LOSS OF REVENUE, LOSS OF ACTUAL OR ANTICIPATED PROFITS, LOSS OF 

BUSINESS, LOSS OF OPPORTUNITY, LOSS OF GOOD WILL, LOSS OF REPUTATION, 

OR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL LOSS OR DAMAGE WHATSOEVER 

CAUSED, INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY.

CUSTOMER RESPONSIBILITIES:

Customers may be required to provide proof of purchase date, respond to 

questions designed to assist with diagnosing potential issues, and follow Trailer 

Valet’s directions to make a claim on your warranty. 

TO MAKE A WARRANTY CLAIM:

Contact us either through:

PHONE: (844) 846-9344

EMAIL: [email protected]

OFFICE: 17970 Ajax Circle, Industry, CA 91748

WEBSITE: www.trailervalet.com

SEVERABILITY: 

The invalidity, illegality, or unenforceability of any provision of this warranty shall not 

render the other provisions invalid, illegal, or unenforceable. 

GOVERNING LAW AND JURISDICTION

This warranty shall be governed by the laws of the State of California. The courts of 

California shall have the exclusive right to adjudicate any disputes arising under or 

in connection to this warranty.

TRAILER VALET SHALL HAVE THE 

EXCLUSIVE RIGHT TO DETERMINE 

IF A UNIT IS COVERED UNDER 

ITS LIMITED MANUFACTURER’S 

WARRANTY. 

Summary of Contents for RVR12

















Reviews: