User Manual
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
9
of
34
3.
Standard assembly
3.1.
Product components
The product is supplied with key componentry including circuit board, internal cabling, motor,
battery, lifting lug and connection billet pre-installed.
Additional standalone components are supplied as part of the standard issue. Please check the
package to ensure the following are available:
•
Extendable boom arm and carry bag (2-4meters)
•
Stop sign (applicable to relevant country, state or region)
•
2x remote controls
•
2x keys for the access panel
•
4x S-hooks for sand bags
•
1x charging lead
•
1x magnet
If any of the supporting components are missing, please contact the distributor or us directly.
*IMPORTANT NOTE:
Ensure battery is fully charged prior to use (this is particularly important for the
effective operation of solar accessories.
3.2.
Assembly guide
It is important to note that specific hand tools or tightening devices are not required for standard
assembly of components. To avoid damage, apply a general hand tightening force to secure
components.
STEP 1
–
Unpack product and check components:
•
Unpack in a safe location, complete a risk assessment of the work area as required.
•
Check the package to ensure all components have been supplied.
•
Ensure product is vertical and on a level and stable surface prior to fitting components.
STEP 2
–
Move product into position and secure:
•
Ensure wheels are unlocked, use handle and foothold to tilt product back.
•
Move into designated position ensuring personal and public safety at all times.
