User Manual
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
13
of
34
4.4.
Testing prior to operation
The product will run a self-testing cycle each time it is turned on. The self-test will run diagnostics for
the inclinometer, software, lights, ports and additional sensors. This process will also recognise any
attachments connected to the product.
STEP 1
–
Turn on the product.
•
Turn product on and wait for the self-testing cycle to complete.
•
Once complete, the power light will illuminate green indicating the product is ready.
•
This will also indicate that any connected accessories have been recognised.
•
If charging the product, a blue light will illuminate.
STEP 2
–
Testing the product.
•
Test the product operation and relevant accessories in manual mode and with remotes.
•
Test the product operation and relevant accessories in automatic mode.
If the light does not turn green, an issue has been identified. Refer to the trouble shooting section of
this manual or contact your distributor.
4.5.
Manual operation, pairing and using remote controls
The product can be operated manually from the control panel and by using the remote controls. It is
recommended that a manual test be conducted on a daily basis, prior to commissioning the product
in the field.
STEP 1
–
Manual operation.
•
Push the red button in the top left hand corner of the control panel.
•
Push the button to run through each respective operation (up/down).
STEP 2
–
Remote pairing instructions.
•
Remote controls provided with the product will be paired with the product.
•
Additional remote controls may be paired to the product, refer to the video resource.
•
https://www.youtube.com/watch?v=oaPN7W04UGI&feature=youtu.be
