User Manual
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
19
of
34
7.3.
Solar panel
The 120W solar panel provides power to the product and eliminates the need for interval recharging
of the product. The panel may be fitted to the product or the traffic light accessory.
STEP 1
–
Unpack the accessory and check components:
•
Check the condition of the accessory to ensure all components have been supplied.
•
Position the accessory in close proximity to the product.
STEP 2
–
Attach accessory to product:
•
Insert accessory into adapter, position panel to face the direction of the sun.
•
Align connection points and secure with wing bolts (minimum of two bolts to be fitted).
•
Apply the same process if fitting to the traffic light accessory.
STEP 3
–
Connect accessory cable to port:
•
Ensure the product is turned off prior to connecting a charging device.
•
Slide the socket cover open and connect the cable and plug.
•
Ensure plug is pushed in and fully connected.
•
A blue LED light will illuminate indicating the product is charging.
•
A red LED light will come on when the battery requires charging.
•
A red LED light will commence flashing prior to the product to shutting down.
STEP 4
–
Test operation:
•
Access the control panel using the key and turn the product on.
•
The product will run a self-test, once complete the green power light will illuminate.
•
A blue LED light will illuminate indicating the product is charging.
