Söllnerstr. 9 92637 Weiden
+49 (0)961 48 23 0 0
MPI-USB user manual
55 / 93
2022/01/21 01:28
8.5.2 Index "Modem":
In this dialog you could configure the modem related setup.
Modem Settings:
Initialization
The initialization string consists of several commands to the modem together:
AT ⇒ start command
&F ⇒ use factory settings
E0 ⇒ echo off
L1 ⇒ volume of speaker is low
M1 ⇒ speaker is on at connection
Q0 ⇒ output of the return values
V1 ⇒ return values plain text
&C1 DCD ⇒ shows status of the carrier sound
S0=1 ⇒ automatic connection after 1 ring
Hang up
The deselection text consists of 2 parts:
+++ ⇒ Switch to command mode
AT ⇒ start command
H ⇒ Hang up connection
Location:
Dialing
The phone system uses There are two possible call techniques:
MFV tone, the telephone number is transfered by several frequencies
IWV pulse, the telephone number is transfered with the amount of several
pulses on the line
Access code
To access an outside
line, first dial
If you need a prefix before your number to establish a call outside, you must
enter the prefix here e.g. 0.
Call Preferences:
Wait for dial tone before
dialing
In case the modem should wait for a free line, you should set the
corresponding checkbox.