Söllnerstr. 9 92637 Weiden
+49 (0)961 48 23 0 0
MPI-USB user manual
38 / 93
2022/01/21 01:28
the PLC.
5. The sector „Address“ should be updated and displays the „PLC Type”. Also the CPU of the PLC is
displayed in the right part of the dialog.
6. Confirm with „OK“ until you get back to the main window. The communication with the PLC is now
established.
6.3.8 Microwin v4.0 in PPI-Multimaster-Mode
1. The PPI-Multimaster-Mode was developed that more devices can communicate parallel with one PLC.
The following steps describe how to configure this mode in hardware and software.
2. The module or cable has to switched in the PPIMulti-Mode. This mode can be switched in the menu-tree
under „Generally“ and „Bootconfiguration“
3. There you have to select „PPIMMaster“ and confirmed with „Saving“.
For LAN-devices you can do this in the integrated WebServer, also.
4. Now, you have to configure the PG/PC - Interface. This could you also do within the Microwin-Software.
5. Start your Microwin-Software.
6. Click on the button „Set PG/PC-Interface“ under „View“ in the left down part of the window.
7. Select the entry „PC/PPI cable(PPI)“ and click on the button „Properties“.