14
A3380002.en_teil2
10 SEAL ADJUSTMENT
The sealing- and cutting depth of the sealing mechanism and the cutter can be adjusted by using a hexagon
key N4.1411 (size 5 mm) and turning the adjustment screw infinitely variable. The hexagon key N4.1411 is
supplied with the tool.
Sealing depth is excessive
Turning the adjustment screw in a clockwise
direction reduces the sealing depth.
Sealing depth is insufficient
Turning the adjustment screw in a counter
clockwise direction increases the sealing depth.
11
TENSION FORCE ADJUSTMENT
For readjustment use allen key N4.1411 5 mm
wide. Turning clockwise increases, and turning
counterclockwise resp. decreases the tension
force by approx. 1375 N per score.
The tension force using low tensile (soft) strap is
generally lower due to its higher friction.
Attention! Never adjust to scale
100Nm (tension force will be
excessive).
After repairs of the torque lever, it has
to be readjusted .
This is carried out by using an allen key 2.5mm
and a torque gauge with square drive socket
wrench 10mm.
Procedure:
Adjust the torque lever at 80 Nm on its scale.
Provide the torque gauge (hex. socket of the tension shaft onto the gauges hex. insert) with the complete
torque drive assembly.
Turn the adjusting screw until the torque lever disengages under a load of 80Nm.
N4.1411
Torque
Tension force
80 Nm
~ 5500 N
60 Nm
~ 4125 N
40 Nm
~ 2750 N
20 Nm
~ 1375 N
N4.1411
2,5 mm
80 Nm
60 Nm
40 Nm
100 Nm
20 Nm
Sales and Service 877-862-6699
WWW.TRADITIONALTOOL.COM
