7
A3380002.en_teil1
Tensioning the strapping
The tool is held tightly with the left hand being placed on the
sealing lever. The torque tension lever is now moved forward
and backward with the right hand until the torque disengages
(click-stop sound ).
Sealing the strapping
The sealing lever is moved forward using the left hand until it
hits the stop. The lever is then moved back to its initial position.
When sealing, the right hand absorbs the sealing force by
holding the tensioning handle.
Releasing the tool
Hold the cut off strap end with the left hand, lift the rocker with
the right hand and push the tool from the applied strap to the
right.
Releasing the feed wheel after faulty operation
If the feed-wheel is jammed with the strap and the rocker cannot
be released the following procedure is necessary to remove the
strapping from the tool:
•
loosen screws N1.1563, N1.1564 and N11.1112.
•
lift rocker and remove steel strapping from the tool.
•
retighten screws N1.1563, N1.1564 and N11.1112 with a
torque of 90 Nm / 800 lbs.
Rocker
N1.1564
N1.1563
N11.1112
Sales and Service 877-862-6699
WWW.TRADITIONALTOOL.COM
