Tradesman M2501LW, Owner'S Manual

Page: 6 / 27

PRE ASSEMBLY
ACCESSORIES AND ATTACHMENTS
Use only the recommended accessories with this saw.
TOOLS REQUIRED FOR ASSEMBLY
RECOMMENDED ACCESSORIES
Use only accessories recommended for this miter
saw. Follow instructions that accompany accessories.
Use of improper accessories may cause hazards.
The use of any cutting tool except 10 inch saw
blades that meet the requirements under
recommended accessories is prohibited. Do not use
accessories such as shaper cutters or dado sets.
Ferrous metal cutting, the use of abrasive wheels
and the cutting of masonry products are prohibited.
Do not attempt to modify this tool or create
accessories not recommended for use with this tool.
Any such alteration or modification is misuse and
could result in a hazardous condition leading to
possible serious injury.
ACCESSORIES
Contact technical support regarding accessories for your
power tool.
To avoid the risk of personal injury, do not modify this
power tool or use accessories not recommended to fit
your tool.
Read warnings and conditions on your CARBIDE
TIPPED SAW BLADE. Do not operate the saw without
the proper saw blade guard in place. Carbide is a very
hard but brittle material. Care should be taken while
mounting, using, and storing carbide tipped blades to
prevent accidental damage. Slight shocks, such as
striking the tip while handling, can seriously damage the
blade. Foreign objects in the workpiece, such as wire or
nails, can also cause tips to crack or break off. Before
using, always visually examine the blade and tips for
bent teeth, cracks, breakage, missing or loose tips, or
other damage. Do not use if damage is suspected.
Failure to heed safety instructions and warnings can
result in serious bodily injury or loss of eyesight.
6
Phillips Screwdriver
CAUTION
!
CAUTION
!
CAUTION
!
Estimated Assembly Time 10~20 minutes