Tradesman DP12LW, Owner'S Manual

Page: 6 / 22

PRE ASSEMBLY
ACCESSORIES AND ATTACHMENTS
Use only the recommended accessories with this drill press.
Follow the instructions that are supplied with these accessories.
CAUTION!
Use of improper accessories may cause hazards.
Visit the tool department for the following accessories:
Drill bits
Hold-Down Clamps
Drill press Vises
CAUTION!
Use only acessories designed for this drill press to avoid injury
from thrown broken parts or workpieces.
Do not use any accessory unless you have completely read the
instruction or owner’s manual for that accessory.
TOOLS REQUIRED FOR ASSEMBLY
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
CAUTION!
If any part is missing or damaged, do not plug the drill press in
until the missing or damaged part is replaced, and assembly is
complete.
Carefully unpack the drill press and all its parts, and compare
against the list.
To protect the drill press from moisture, a protective coating has
been applied to the machined surfaces. Remove this coating
with a soft cloth moistened with kerosene or WD-40.
CAUTION!
To avoid fire or toxic reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar highly volatile solvents to
clean the drill press.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A Head assembly 1
B Base 1
C Table 1
D Column assembly 1
E Collar 1
F Rack 1
G Feed handles 3
H Worm gear 1
I Crank handle 1
J Lock handle 1
K Hex bolts 4
L Hex keys 2
M Chuck key 1
N Chuck 1
O Batteries 2
6
Slotted screwdriver
Combination wrench
Framing squqre
8”&10”Adjustable wrench
Combination square
Socket wrench with 23mm socket